Custom / Materials

Materials and colors

Custom projects are limited to the fabrics and colors currently available in the workshop.

Fabrics

Dyneema

Top view of 3-GD026 Dyneema Mesh

01 / 03

3-GD026 “Dyneema® Mesh”

Use: External mesh pockets and ventilated panels.
Weight: 168 g/linear m (112 gsm at 150 cm width)
Characteristics: 100D nylon mesh with a Dyneema® grid; high tensile, tear, and abrasion resistance.
Available colors: Black and white; availability is confirmed for each request.

Face of 3-GD110-2 Dyneema Durable 2Way-Stretch

01 / 02

3-GD110-2 “Dyneema® Durable 2Way-Stretch”

Use: Stretch pockets and flexible exterior panels.
Weight: 239 g/linear m (approx. 184 gsm at 130 cm width)
Characteristics: 70D nylon base with a Dyneema® grid; more than 35% stretch in both directions and high abrasion resistance.
Available colors: Black

Face of 3-GD052 Ripstop with Dyneema

01 / 02

3-GD052 “Ripstop with Dyneema®”

Use: Main panels and areas that need a coated ripstop surface.
Weight: 192 g/linear m (approx. 132 gsm at 145 cm width)
Characteristics: Nylon ripstop reinforced with Dyneema®; water-resistant to 1,000 mm and tested beyond 100,000 abrasion cycles.
Available colors: Black and white; availability is confirmed for each request.

Face of 3-RAMENC0 Dyneema Hard ripstop

01 / 02

3-RAMENC0 “Dyneema® Hard R/S”

Use: Flexible bag panels and high-wear reinforcement areas.
Weight: 313 g/linear m (approx. 241 gsm at 130 cm width)
Characteristics: Stretch nylon with a Dyneema® grid; water-repellent finish and high abrasion resistance.
Available colors: Black

Face of 3-CT5K18-4 Dyneema Composite Hybrid

01 / 02

3-CT5K18-4 “Dyneema® Composite Hybrid”

Use: Lightweight main panels requiring a more abrasion-resistant face.
Weight: 104.2 gsm
Characteristics: 50D polyester-faced Dyneema® Composite Hybrid with water resistance above 70,000 mm.
Available colors: Black and white; availability is confirmed for each request.

Face of 3-CT5K18 Composite Fabric

01 / 03

3-CT5K18 “Composite Fabric”

Use: Ultralight main panels and low-bulk waterproof constructions.
Weight: 52.5 gsm
Characteristics: Dyneema® Composite Fabric with polyester coating on both sides and water resistance above 45,000 mm.
Available colors: Black and white; availability is confirmed for each request.

X-Pac

Black X-Pac UX10 fabric face

01 / 02

X-Pac® UX10

Use: Ultralight main panels, pouches, and bike bags.
Characteristics: 100D Ultra-PE face, X-PLY® reinforcement, and PET film backing; waterproof at 85 gsm.
Available colors: Black and white; availability is confirmed for each request.

Face texture of X-Pac UX10 ST fabric

01 / 03

X-Pac® UX10 ST

Use: Ultralight main panels that benefit from a protective textile backing.
Characteristics: UX10 face and X-PLY® construction with a waterproof polyester taffeta backing; approximately 116 gsm.
Available colors: Black and white; availability is confirmed for each request.

Face of X-Pac VX21 fabric

01 / 03

X-Pac® VX21

Use: Main bag bodies and higher-wear panels.
Characteristics: 210D nylon face, X-PLY® reinforcement, PET film, and 50D taffeta backing; approximately 203 gsm.
Available colors: Black

Challenge UltraWeave™

Face of Ultra100X fabric

01 / 05

Ultra100X

Use: The lightest main panels and small accessories.
Characteristics: 100D Ultra-PE and polyester face with CrossPly and film backing; 112 gsm.
Available colors: Black, White, Gray

Face of Ultra200X fabric

01 / 02

Ultra200X

Use: General-purpose ultralight bag bodies.
Characteristics: 200D Ultra-PE and polyester face with CrossPly and film backing; 133 gsm.
Available colors: Black, White, Gray

Challenge TX Ultra™

Roll of white TX50 Ultra fabric

01 / 03

TX50 Ultra™ Sail White

Use: Ultralight panels intended for custom printing and low-load applications.
Characteristics: 50D triple-ripstop polyester face, 45° Ultra™ CrossPly, and 0.25 mil PET film; 82 gsm. Reinforce high-load areas.
Available colors: Sail White

Silver TX70 Ultra fabric face

01 / 03

TX70 Ultra™ Silver Bullet

Use: Small bags, pack liners, and lightweight accessories.
Characteristics: 70D recycled polyester ripstop face, black 45° Ultra™ CrossPly, and 0.25 mil PET film; 99 gsm. Reinforce high-load areas.
Available colors: Silver Bullet

Challenge UltraGrid™

Black UltraGrid fabric

01 / 04

UltraGrid™

Use: General-purpose bag bodies, reinforcement panels, and accessories.
Characteristics: 210D recycled nylon with a double 200D Ultra™ grid, C0 DWR, and a waterproof 1,500 mm PU backing; 146 gsm.
Available colors: Black Beauty, BlackOut

Challenge ECOPAK™

Face of EPX70RS fabric

01 / 02

EPX70RS

Use: Small accessories, soft liners, and lightly loaded panels.
Characteristics: 70D recycled polyester ripstop face and backing with CrossPly; 171 gsm. Reinforcement is recommended in high-abrasion areas.
Available colors: Black

Face of EPX200 fabric

01 / 02

EPX200

Use: Small to mid-size bags and general-purpose panels.
Characteristics: 200D recycled polyester face, CrossPly, and 70D ripstop backing; 216 gsm.
Available colors: Black and white; availability is confirmed for each request.

Face of EPLX200 fabric

01 / 03

EPLX200

Use: Waterproof liners and lightly loaded face panels.
Characteristics: 200D recycled polyester face with CrossPly and matte waterproof RUV™ film; 162 gsm. Reinforce attachment points.
Available colors: Black and white; availability is confirmed for each request.

ALUULA

Detail of black ALUULA Graflyte fabric

01 / 03

ALUULA Graflyte™

Use: High-wear reinforcement panels.
Characteristics: Detailed construction and performance specifications pending.
Available colors: White